
Technical documents
Data sheets, test reports and certificates
Everything your technical team needs to evaluate our coatings. Tell us which products you are looking at and we send the documents within one working day.
- A technical data sheet for every product
- Third-party test reports, with report numbers you can verify
- English versions of the test reports available
What we can send you
| Document | What it covers | Available for |
|---|---|---|
| Technical data sheet | Use, suitable surfaces, number of coats, coverage, drying, packaging and storage | All 14 products listed below |
| Third-party test report | Full results from the National Building Materials Testing Center (CTC Group); English versions available | Five key products — see the table below |
| Application guide | Surface preparation, layers, coats and film thickness for each system | Each cool roof, anti-rust and waterproofing system |
| Transport classification report | Sea-freight classification of the product being shipped | Confirmed product by product before shipment |
| ISO certificates | ISO 9001, ISO 14001 and ISO 45001 | The company |
| Patent certificate | Water-based rust converter, patent no. ZL201910886793.4 | MAP120 rust converter primer |
| Temperature measuring method | How we measure roof and indoor temperatures before and after coating | Published on this site |
Documents are sent by email on request. We do not ask you to register.
Third-party test reports
Tested by the National Building Materials Testing Center (CTC Group). Report numbers can be verified; ask us for copies.
| Product | Report no. | Key results |
|---|---|---|
| 902 cool roof topcoat (sample TYS-BIC560) | WT2020B01C04600 | Solar reflectance 0.86, near-IR 0.85, emissivity 0.90; reflectance change after soiling 5% (standard allows 20%); dirt pick-up 9%, superior grade |
| TIC610 insulating mid-coat | WT2023B01C01585 | Bond 1.7 MPa (≥ 0.4 required); thermal conductivity 0.14 W/(m·K); water and alkali, no defects |
| CST880 anti-corrosion system (primer + topcoat) | WT2020B01C04598 | Salt spray 300 h, acid 48 h, alkali 48 h, water 96 h, condensation 120 h — no defects; ageing 300 h grade 0; adhesion 7 MPa, 6 MPa after salt spray |
| AEW320 roof waterproofing coating | WT2021B01C03937 | Elongation 527%; 276% after heat ageing, 584% / 581% after acid / alkali; watertight at 0.3 MPa; no cracks at −10 °C |
| MAP120 rust converter primer | WT2020B01C04599 | Humidity 120 h, water and salt water 48 h, no defects; 96 h salt spray rust grade 0; impact 50 cm |
Products with a technical data sheet
| Range | Code | Product |
|---|---|---|
| Cool roof | TYS-BIC560-902 | Heat-Reflective Cool Roof Topcoat |
| Cool roof | TYS-BIC560-901 | Heat-Insulating Primer |
| Cool roof | TYS-TIC610 | Insulating Mid-Coat |
| Anti-rust | TYS-MAP120 | Water-Based Rust Converter Primer |
| Anti-rust | TYS-RPP210 | Rust-Tolerant Anti-Rust Primer |
| Anti-rust | TYS-CST880-701 | 2-in-1 Rust Primer & Topcoat |
| Anti-rust | TYS-CST880 | Metal Roof Anti-Corrosion Topcoat |
| Anti-rust | TYS-SPC410 | Water-Based Aluminium Paint |
| Waterproofing | TYS-AEW320 | Elastomeric Acrylic Roof Waterproofing Coating |
| Waterproofing | TYS-LMC340 | Liquid Membrane Waterproofing Coating |
| Waterproofing | TYS-JSF310-01 | Polymer Cement Waterproofing Coating (Type I) |
| Waterproofing | TYS-JSF310-02 | Polymer Cement Waterproofing Coating (Type II) |
| Waterproofing | TYS-PUC350 | Polyurethane Waterproofing Coating |
| Waterproofing | TYS-TWC330 | Clear Waterproofing Coating for Walls |
Questions about the documents
Are the test reports in English?
English versions of the test reports are available. Tell us which products you need them for.
Can we verify the reports?
Yes. Each report carries a number issued by the National Building Materials Testing Center (CTC Group), listed on this page.
Which standards were the products tested to?
The reports follow Chinese national standards. If your market requires testing to another standard, tell us which one; under custom development we formulate to your local standards.
Can we get samples as well?
Yes. Samples are charged and refunded on your first order.
Evaluating us as a supplier or development partner?
See the three ways to work with us: finished coatings, OEM/ODM from 5 tonnes, or core materials for local production.
Request documents
Tell us the products and the documents you need. We reply within one working day.
- Project enquiry (factory owners)Send roof photos, the area and what's wrong — heat, rust or leaks. We'll tell you how we'd fix it and quote item by item.
- Documents, samples or partnershipData sheets, test reports, certificates and samples for evaluation.
We reply by email within one working day.
