Products · Cool roof coatings

Cool roof coatingsReflect the sun before it heats the building

A water-based system for metal and concrete roofs, made in our own factory in Foshan and used on our own projects. Standard build-up: 901 primer + 902 topcoat. Over hot processes or under low roofs, add the TIC610 insulating mid-coat.

  • Solar reflectance 0.86, emissivity 0.90 (902)
  • Indoor air 6–12 °C cooler on most projects
  • Water-based, single-component, non-flammable
  • No MOQ · 20 kg pails · ships 3–5 days after payment

Which build-up?

Build-upCoatsUse when
Standard: 901 + 902901 ×1–2, 902 ×1–2Metal and concrete roofs where sun on the roof is the main heat source
Enhanced: 901 + TIC610 + 902901 ×1–2, TIC610 in 2–3 passes, 902 ×1–2Low roofs, hot processes, or where both summer heat and winter insulation matter
Rusty metal roofRPP210 ×2 (or MAP120 ×1 + RPP210 ×2), then 901 + 902Treat the rust first; the cool roof coats go on top

Products

TYS-BIC560-902 Heat-Reflective Cool Roof Topcoat

TYS-BIC560-902Topcoat

Heat-Reflective Cool Roof Topcoat

Keeps sunlight off the roof. At Shaanxi Baoguang (primer and topcoat, two coats each) workshop air went from 45.9 °C to 33.5 °C.

  • High reflectance: solar 0.86, near-infrared 0.85
  • Radiates heat away: hemispherical emissivity 0.90
  • Stays effective: reflectance changed only 5% after soiling; 2,000 scrub cycles
  • Water-based, single-component, low odour, non-flammable

Used for

  • Metal and concrete roofs on factories, warehouses and cold stores
  • Pig and poultry houses, feed silos and other farm buildings in strong sun
  • Storage tanks, equipment housings and walls that need to stay cooler
PropertyResultBasis
Solar reflectance (white, L* = 95)0.86Std ≥ 0.80 · CTC WT2020B01C04600
Near-infrared reflectance0.85Std ≥ 0.80
Hemispherical emissivity0.90Std ≥ 0.85
Reflectance change after soiling5%Std ≤ 20%
Dirt pick-up resistance9%Superior grade ≤ 15%
Contrast ratio (hiding)0.96Superior grade ≥ 0.93
Water / alkali resistance96 h / 48 h, no defectsGB/T 25261-2018
Touch-dry50 minStd ≤ 2 h

Third-party data: CTC test report WT2020B01C04600 (10 March 2021), GB/T 25261-2018.

Consumption
0.17–0.25 kg/m² per coat
Coats
1–2, cross-applied
Colour
White (standard); light colours on request — reflectance varies with colour
Application
Airless spray, roller or brush
Recoat
≥ 4 h at 23 °C
Packing
20 kg pail · no MOQ

Get a price · BIC560-902Request the data sheet

TYS-BIC560-901 Heat-Insulating Primer

TYS-BIC560-901Primer

Heat-Insulating Primer

The first coat of the cool roof system: seals the substrate, bonds the topcoat and blocks near-infrared heat at the base.

  • Blocks near-infrared heat at the bottom of the system
  • Penetrates and seals: controls dust and efflorescence so the topcoat bonds better
  • Works with 902: primer blocks, topcoat reflects and radiates
  • Topcoat the same day: through-dry in about 4 h

Used for

  • Metal roof sheets on factories, warehouses and farm buildings
  • Concrete roofs, cement render and walls
  • Metal housings of feed silos and bins
PropertyResultBasis
Bond strength≥ 0.4 MPaCompany standard (GB/T 25261-2018 system)
Touch-dry (23 °C)≤ 2 hGB/T 1728
CompositionSingle-component, water-based—
ThinnerClean water—
Consumption
0.17–0.25 kg/m² per coat
Coats
1–2
Substrates
Metal roof sheet, galvanised and Galvalume steel, concrete, render, sound old coatings; rusty metal needs MAP120 / RPP210 first
Recoat
After through-dry (~4 h at 23 °C), within 7 days
Packing
20 kg pail · no MOQ

Get a price · BIC560-901Request the data sheet

TYS-TIC610 Insulating Mid-Coat

TYS-TIC610Mid-coat

Insulating Mid-Coat

For workshops with concentrated heat sources or low roofs: an extra layer between 901 and 902 with a thermal conductivity of 0.14 W/(m·K).

  • Low thermal conductivity: 0.14 W/(m·K) at 25 °C (third-party tested)
  • Strong bond: 1.7 MPa
  • Reflect + insulate: with 902, absorbs less and conducts less
  • Easy on curved surfaces: trowel, roller or spray

Used for

  • Heat-blocking layer on metal and concrete roofs (between 901 and 902)
  • Walls, pipes, tanks and equipment housings
  • Farm and cold-chain buildings that need summer heat and winter insulation
PropertyResultBasis
Bond strength (standard)1.7 MPaStd ≥ 0.4 MPa · CTC WT2023B01C01585
Thermal conductivity (25 °C)0.14 W/(m·K)Measured
Alkali (48 h) / water (96 h)No defects
Temperature-cycle resistance (3 cycles)No defects
Touch-dry1 hStd ≤ 2 h

Third-party data: CTC test report WT2023B01C01585 (16 November 2023).

Consumption
0.25–0.5 kg/m² per pass
Coats
2–3 passes, max 0.5 mm wet per pass
Application
Trowel, roller or spray (large nozzle)
Recoat
≥ 6 h at 23 °C between passes
Packing
20 kg pail · no MOQ

Get a price · TIC610Request the data sheet

Buying questions

Is there a minimum order?
No MOQ on standard products. Everything is packed in 20 kg pails.
Can we get samples?
Yes. Samples are charged, and the cost is refunded on your first order.
How fast do you ship?
Within 3–5 days after payment.
How much do I need?
As a guide, 0.17–0.25 kg/m² per coat for 901 and 902. Send us the roof type and area and our engineers will calculate the quantities for your build-up.
What documents can you provide?
Technical data sheets and the third-party test reports listed on this page. Tell us what your project or import process needs.
Will you help our applicators?
Yes. We send full application instructions and train your applicators by video. For larger projects our technician can come to site to set the specification and supervise the first areas.

Want this range under your own brand?

OEM from 5 tonnes, with packaging printed to your design. Custom development with no fee and first samples in one week. Coating manufacturers can also produce locally with our core materials.

Request a quote for cool roof coatings

Tell us what you need. Photos of the roof help us answer faster.

  • Project enquirySend roof photos, the area and what's wrong — heat, rust or leaks. We'll tell you how we'd fix it and quote item by item.
  • Product enquiryTell us the products, the roof type and area, and the destination. Not sure of the build-up? Our engineers will specify it.

We reply by email within one working day.

I need
Problem (tick all that apply)
Tap to choose photos, or drag them here

We use your details only to answer this enquiry.